Spectrum-SL is a evlolutionary version of well known SPECTRUM-S. It comes in 3 models:
It has improved flexible print area:
Features:
It is very well tested design, with lots of improvements implemented, AC driven print heads, servo INDEXER rotation system, all features control keypad on every head. Software fully corresponds with machine's hardware possibility. Sequences, Multi print flashing, half index in both directions, fully implemented IR Quartz flashes. Front-rear screen holders gives flexible print area possibilities.
Specifications | SPECTRUM-SLE 8/10 | SPECTRUM-SLE 10/12 | SPECTRUM-SLE 12/14 |
---|---|---|---|
Air requirements |
7 Bar, 480 l/min |
7 Bar, 580 l/min |
7 Bar, 680 l/min |
Electrical requirements |
400 V, 3PH, 7 kW |
400 V, 3PH, 8 kW |
400 V, 3PH, 10 kW |
Total diameter | 468 cm | 488 cm | 502 cm |
Standard print area | 50 х 60 cm | 50 х65 cm | 50 х 60 cm |
Maximum print area (double index) | 70x90 cm | 70x90 cm | 70x90 cm |
Standard pallets | 41х56 cm | 41х56 cm | 41х56 cm |
Total weight | 1800 kg | 2100 kg | 2350 kg |
Rotation
• Precise servo driven rotation
• Parameterized for different pallet weights ensuring smooth rotation
• Bi-directional rotation – Clockwise and Counter-Clockwise
• Servo driven indexing in combination with multi-print flashing saves a print position
Lifting
• Servo drive lift
Print head
• Membrane panel with full control of all head functions and machine motion movements
• AC driven print stroke with frequency converter for speed and torque control
• Longest serial equipped print stroke – full stroke length dependent on machine size
• Inner and outer print stroke adjustment with fault proof carriage system – eliminates possibility of head crash
• Constant print area rule - which allows the printer to pass along characteristics of print length to width and vice versa
• Digital OFF CONTACT
• Software is constantly upgraded according to printers suggestions (We gladly listen to your comments, as they help us create
a better screen printing tool and help us grow as a manufacturer!)
Screen Locks
• Pneumatic screen locks controlled directly from every print head
• Additional manual clamps for increased screen pressure
Registration
• Division tolerance is extremely accurate because we understand that proper registration is directly responsible for print
quality
• Upper division has an acceptable range of +/-0,01 mm
• Printing point on pallets has maximum deviation of +/- 0,025 mm.
• The numbers above ensure maximum accuracy for textile screen printing and also enables accuracy for other specialty
materials and surface printing
• Front micro-alignment with 3 axis
• Rear micro-alignment with 1 axis
• Fast print alignment with floor light pallet
Squeegee and flood bar
• Independent settings for squeegee and flood bar print adjustment
• Squeegee air pressure regulators with glass gauges for longevity
• Fast and simple squeegee and flood bar angle adjustment
Warranty and service
• 2 year warranty
• Service agreement with special conditions
Additional Options
• Single touch fast squeegee and flood bar locks
• Special upper wheel design to fit through 80 cm (30 " doors)